Jagenberg Sheeter:
Providing press-ready skids of precision cut paper and board, the Jagenberg can produce as much as 120 tons
per 24 hour period when optimally configured. The
Jagenberg is capable of pulling side trim and can slit as
many as 3 sheets from a given roll width.

Product Ranges:
  • Uncoated offset: 40# and up
  • Coated Offset: 50# and up
  • Coated and Uncoated
    boards: .006 - .024 calipers
Seybold Guillotine Trimmer:
Think of it as an appendage of the Hamblet sheeter 
when it runs fine papers. The Hamblet is dependent 
upon the Trimmer to produce Press Ready sheets of 
fine paper. The Trimmer is also utilized if short run, heavy weight board is required from the Clark Aiken sheeter, 
or if the parent roll widths do not match the finished sheet
size widths.

Product Ranges:
          Virtually any paper and board

Specifications:

  • Minimum trim is 8" x 10"
  • Maximum trim is 54" x 78"
  • Trimmer width is 100"
Specifications:
  • Minimum cut off length is 17"
  • Maximum cut off length is 64"
  • Maximum sheetable roll
    width is 63"
Clark Aiken Sheeter:
Providing press-ready sheets of coated and uncoated
boards, the Clark Aiken produces approximately 12 
tons per 8-hour shift. 

Product Ranges:
Uncoated and C1S boards: .012 to .032 in caliper

Specifications:

  • Cuts rolls up to 57" wide
  • Minimum cut off length is 24.25"
  • Maximum cut off length is 80"
 120" Cameron Slitter-Rewinder:

This rewinder will run almost all product ranges from light
weight forms bond through .030 board. It is equipped
with a shaftless unwind and can support 7000# rolls wound
on core sizes ranging from 3" to 16". It can slit a maximum of 7 rolls out of one parent roll and will produce rolls as narrow as 7.75" in width. With its shaftless rewind system, we can produce core sizes off the front of 3, 4, 5, 6, and 12 on diameters from 15" up to a maximum of 60". It features its own trim elimination system.
Hamblet Sheeter:
Offering a wide range of capabilities, the Hamblet sheeter
is primarily used for short to medium length runs of book
papers and lightweight boards, as well as provide a cost
effective way to sheet short runs of custom size orders
for fine paper. The Hamblet sheeter can also slit off side
trim and can slit 2 sheets from a given roll width.

Product Ranges:
Boards of all kinds:
Uncoated, C1S and C2S: .006 up to and including .016
Uncoated and Coated Book papers: 30# to 146#(25x38)
Home